Simple Digital DIC TCS Lamp Inversion

Written by Backinblack, Member 5888
Applies to the following vehicles: 1998-2002
Created 2/24/2008, Updated 2/26/2008

Write-Up Rating
Rated by 4 members

This mod will fix the TCS lamp from being incorrect when you install a GTP digital DIC into a GT or SE platform.

1: Completely disassemble DIC unit.

2: Locate and remove TCS lamp and cut trace as shown.

3: Locate connector pin A6 and cut trace as shown.

4: Solder jumper wire between lamp pad and pin A6. Be sure not to accidentally bridge anything with solder.

5: Reassemble and enjoy

This may work for 1997 and 2003 years but I cannot verify at this time. Try at your own risk.

Your Rated this Write-Up

0.0146
About Us | 1/4 Mile Times | Advertisers | GP Info | Books | Chat/IRC | ClubGP Info
ClubGP Donations | Free Email | Message Forum | Nat'l Gathering | Owners Registry | Parts List | Photo Albums |
Raffles | GPX Info | Contact Us | Upgrades | Voting Booth | Web Links | Web Ring | Terms of Use

NovoWorks, LLC
ClubGP & ClubG8 is a service of FXOL
Copyrights 1997-2010 FXOL. All rights reserved.